In collaboration with Bill Stoppard and ProSkaters Place, Adapt proudly introduces the Signature Series Bill Stoppard GTB! This product can be purchased only from ProSkaters Place or directly from Adapt.

The Signature Series Bill Stoppard GTB skate is a very diverse and complete skate package. The skate comes with the new Symetrics Combo frame that allows you to skate both a 4x84 or a 3x100 setup. Both wheel setups are fully included in the GTB package for an easy swap. Furthermore, the skate comes with 3D SLS removable sliders that can be used for stalls and slides.


Mid season upgrade! New 3D SLS 'BSS' boltprotector now included!

The GTB boot has all the 2021 upgrades as well:

  • The padding in the heel pocket is upgraded for improved fit
  • The nubuck skin is reinforced with ballistic nylon to prevent leather stress around eyelets
  • The internal Quattro mounting plates are now made of aluminium instead of steel. This is not only lighter, it also gives an overall better looking finish.
  • The bottom 3 eyelet sets are now wider apart to allow for more pull on the laces
  • Softfoam added to top of cuff area for improved comfort and fit


The GTB is made with our trusty nubuck 1.3mm leather.  In 2020 we switched from 2mm to 1.3mm nubuck. The thinner material means the skin is just a little bit more flexible, which results in a better fit. While the older GTO model needed some break in time, the GTB 2021 forms to your feet straight out of the box. In short, the nubuck v2 leather provides the same strength and durability but with a better fit. The straps are also single layered to increase fit and comfort.


The GTB shell is a Hyperskate diolene shell, finished with extra layers of black twill 3k carbon for improved responsiveness and a dark look. Like all Hyperskate models, the GTB features the Quattromount. The Quattromount is the most versatile mount in the industry as it fits both 165mm and 195mm frames as well as the new Symetrics Quattro S frame. The mount also provides an extremely low centre of gravity, with the wheels as close to your feet as possible.



  • Dutch Nubuck v2 leather skin, orange GTB logo and orange inner holderstrap
  • Airmesh lining
  • High density memory foam
  • Mysole ‘Hyperskate’ insoles
  • Cut-to-size straps, Canadian waxed laces


  • Lightweight, impact absorbing diolene shell and extra twill carbon layers with integrated cuff
  • Thermoplastic shell and tongue
  • Quattro mount fits 165,195mm and Symetrics Quattro S frames


  • Symetrics Combo 'Stay Low' frame, which fits 4x84mm or 3x100mm wheels
  • Includes spacers plates to mount frame for 3x100mm setup. Not needed for 4x84mm setup.
  • 8x84mm wheels including A9 bearings and spacers included
  • 6x100mm wheels including A9 bearings and spacers included
  • Removable 3D SLS sliders included, with mounting hardware
  • Mid season upgrade! New 3D SLS 'BSS' boltprotector now included!


Signature Series Bill Stoppard GTB 4x84mm/3x100mm Package

  • Stock & Production Time

    All sizes will be produced on order.

    Due to production material delivery issues during the pandemic and the exponential increase in demand for inline skates, production time has increased. Production time is about 6-8 weeks right now.

  • Size information

    Make sure you order the right size!
    Measure your feet as described here.
    Watch this video about Adapt sizing.

    Size Table:

    Size EU Size UK Size US Length (mm) Length (inch)
    36 4.0 4.5 236 9.29
    37 4.5 5.0 243 9.56
    38 5.0 5.5 250 9.84
    39 5.5 6.0 257 10.12
    40 6.0 7.0 263 10.35
    41 7.0 8.0 269 10.59
    42 8.0 9.0 276 10.87
    43 9.0 10.0 282 11.10
    44 9.5 10.5 288 11.34
    45 10.0 11.0 295 11.61
    46 11.0 12.0 301 11.85
    47 12.0 13.0 307 12.09